LM7-200V24G
LED power supply for 24 Vdc constant voltage
8.34 A (200 W) max., IP67, built-in installation, non-dimmable
Flicker-free according to IEEE 1789
Electrical Data
| Input Voltage (nominal) | 100…277 Vac |
| Input Voltage (range) | 90…305 Vac |
| Mains Frequency | 50/60 Hz |
| Power Factor (λ) | ≥ 0.95 Full Load ≥ 0.9 70…100% Load |
| Input Current | ≤ 2.0 A 80% Rated Load, 120 Vac ≤ 1.0 A Rated Load, 230 Vac ≤ 0.9 A Rated Load, 277 Vac |
| No-Load Loss | ≤ 0.5 W |
| Inrush Current | ≤ 75 A Full Load, 240 Vac |
| Leakage Current | ≤ 0.7 mA 240 Vac 50 Hz ≤ 0.75 mA 277 Vac 60 Hz |
| Output Voltage | 24 Vdc |
| Output Current | 0…8.34 A |
| Output Power (nominal) | 200 W max. |
| Efficiency | ≥ 91 % 230 Vac ≥ 89 % 120 Vac |
| Life Time | > 85,000 h |
| Dimmable | No |
Operating Condition
| Operating Ambient Temperature (ta) | -40…+50 °C Rated Load 50…+70 °C 70% Rated Load |
| Max. Surface Temperature (tc) | 90 °C |
| Protection Class | Class I |
| Type of Protection | IP67 |
Protection
| Short Circuit Protection | Yes * |
| Overcurrent Protection | Yes * 120…160% |
| Overvoltage Protection | Yes * 110…150% |
| Overheating Protection | Yes * 90 °C < Tc < 110 °C |
(*) The output shuts off and will be resumed, after problem is removed and led driver is restarted.
Standards & Certificates
| Normen | EN 61347-1, EN 61347-2-13 EN 62493, EN 62384 EN 55015, EN 61547 EN 61000-3-2, EN 61000-3-3 |
| Approval Marks | CE, UKCA |
| RoHS Compliant | Yes |
Installation
| Cable Length, input side | 300 mm |
| Cable Length, output side | 300 mm |
| Cable Cross-Section, input side | 3 x 1.0 mm² |
| Cable Cross-Section, output side | 2 x 1.0 mm² |
| Cable Preparation Length, input side | 10 mm tinned |
| Cable Preparation Length, output side | 10 mm tinned |
Dimension
Connection
