LED Trafo 24V 200W constant voltage for LED Strip Lamp flicker-free super slim Furniture installation LED Driver Treiber Transformator
US-200V24P
LED power supply for 24 Vdc constant voltage
8.33 A (200 W) max., IP20, independent installation, non-dimmable
Flicker free according to IEEE 1789
Electrical Data
| Input voltage (nominal) | 220…240 Vac |
| Input voltage (range) | 198…264 Vac |
| Mains Frequency | 50/60 Hz |
| Power Factor (λ) | ≥ 0.95 Full Load |
| Input Current | 1.1 A max. |
| Inrush Current | 80 A max. |
| No-load loss | ≤ 0.5 W |
| Output Voltage | 24 Vdc |
| Output Current | 0…8.33 A |
| Output Power (nominal) | 200 W max. |
| Efficiency | ≥ 95 % Full Load |
| Life Time | > 50,000 h |
| Dimmable | No |
LED Trafo 24V 200W constant voltage for LED Strip Lamp flicker-free super slim Furniture installation LED Driver Treiber Transformator
Operating Condition
| Operating Ambient Temperature (ta) | -20…+45 °C |
| Max. Surface Temperature (tc) | 90 °C |
| Protection Class | II |
| Type of Protection | IP20 |
Protection
| Short Circuit Protection | Yes * |
| Overload Protection | Yes * |
| Overvoltage protection | Yes * |
| Overheating protection | Yes * |
(*) The output shuts off and will be resumed, after problem is removed and led driver is restarted.
Standards & Certificates
| Normen | EN 61347-1, EN 61347-2-13 EN 62493, EN 55015, EN 61547 EN 61000-3-2, EN 61000-3-3 |
| Prüfzeichen | CE, UKCA |
LED Trafo 24V 200W constant voltage for LED Strip Lamp flicker-free super slim Furniture installation LED Driver Treiber Transformator
Installation
| Type of Installation | Independent installation |
| Type of Connection | Screw terminal |
| Cable Cross-section, input side | 0.5…1.5 mm² |
| Cable Cross-section, output side | 0.5…1.5 mm² |
| Cable Preparation length, input side | 6.0 mm |
| Cable Preparation length, output side | 6.0 mm |
Dimension
Connection
