LS7-24V12E
LED power supply for 12 Vdc constant voltage
2 A (24 W) max., IP67, built-in installation, non-dimmable
Flicker-free according to IEEE 1789
Electrical Data
| Input Voltage (range) | 198…264 Vac |
| Rated input voltage (AC) | 220…240 Vdc |
| Mains Frequency | 50/60 Hz |
| Power Factor (λ) | 0.95 230Vac/50Hz, Full Load |
| Input Current | 0.16 A 198 Vac, Full Load |
| No-Load Loss | < 0.5 W 230Vac/50Hz |
| Inrush Current | < 25 A 380μS, 230Vac/50Hz, Full Load |
| Output Voltage | 12 Vdc |
| Output Current | 0…2 A |
| Output Power (nominal) | 24 W max. |
| Efficiency | ≥ 86% 230Vac, Full Load, 25℃ |
| Life Time3 | 30,000 h 230Vac, Full Load, tc=75℃ |
| Dimmable | No |
Operating Condition
| Operating Ambient Temperature (ta) | -20…+50 °C |
| Max. Surface Temperature (tc) | 90 °C |
| Permitted rel. humidity during operation | 5…100% |
| Protection Class | Class II |
| Type of Protection | IP67 |
Protection
| Short Circuit Protection | Yes(2) |
| Overload Protection | Yes(2) 100-150% |
| Overcurrent protection | Yes(1) |
| Overvoltage Protection | Yes(1) |
| Overheating Protection | Yes(1) |
(1) The output turns off and can be restored after correcting the problem and restarting the power supply.
(2) The output switches to “Hiccups” mode and can be restored after the problem has been resolved and the power supply restar
ted.
Standards & Certificates
| Standards | EN 61347-1, EN 61347-2-13 EN62493, EN 62384, EN 55015 EN 61000-3-2, EN 61000-3-3 EN 61547, EN 57710 |
| Approval Marks | CE，UKCA |
| RoHS Compliant | Yes |
Installation
| Type of installation | Built in installation |
| Typ e of connection | Connected double instulated cable 2 x 1 mm² |
| CCable length , output side | 300 ± 10 mm |
| Cable Cross-Section, output side | 300 ± 10 mm |
| Cable Preparation Length, input side | 10 mm |
| Cable Preparation Length, output side | 10 mm |
Dimension
Connection
